The bookshelf wall

Take out the living-room built-in and put back a small library that fills the wall, from the window casing to the corner: an arched reading seat by the window, then shelves and cupboards in one deep green under a cornice, with oak tops and brass, around a framed TV with a row under it for the speakers and the record player.

Paint Walls

Drag to turn, pinch or scroll to zoom, two fingers or right-drag to slide. “Drawing” inks every board and puts the dimensions on. Every board in the model is a box in real inches, and the cut list below is counted from those same boxes; the books, the vases, the light and the picture are dressing. “Evening” turns the lamps on. The swatches repaint the unit and the walls; the choice stays on this device.

Wide
12′ 4″
Tall
94″
Book openings
18
Doors + drawers
6 + 2
Screen
65″
Materials
≈ $3k

The job in one paragraph

Demolish the existing site-built unit (about 8½ ft wide). Build and install a built-in about 12 ft 4 in wide and 94 in tall, running from the window casing to the right-hand wall and scribed to both, finished in one deep green with a cornice at the ceiling, oak for the counter and the seat, and unlacquered brass. At the window end, a 44 in reading nook under an arch: a bench 22 in deep with two drawers, a 19 in seat with a ticking cushion, a papered back with a reading light and a picture light over the arch, and two rows of shelves above. The other 104 in: three base cabinets, 18 in deep, with six shaker doors under an oak counter at 31 in; on the counter a framed niche for a 65 in TV in a gilt frame, with a row of four cubbies above it and an open media row below it for two speakers and a turntable; and at the corner a bookcase tower, 12 in deep, two columns by five rows. Power and low-voltage are brought to the niche, to the two base cabinets under it, which hold the amplifier, the network switch and the wires, and to the two lights.

The pictures

A rendering of the new built-in: white shelves the full width of the wall, a landscape painting showing on the TV in the middle, louvered doors along the bottom
The first rendering. Where this started: the screen in a framed panel with the stereo under it and shelves to the ceiling. The plan has since moved on from it: the left end is a reading seat, the white and the louvers have become green paint and panelled doors, and the screen sits about five inches right of the wall's centre.
The room today: a white built-in about two-thirds the width of the wall, a guitar hanging to its left
Today. The unit stops short of both ends of the wall, the left base is open, and the middle has no home for a screen. The guitar on the wall is the yardstick for every number here.
The same photo with a hand sketch over it: a white grid of shelves across the whole wall, a green rectangle marked tv, green boxes under it
The first sketch. White is shelving, green is the TV and what sits under it. The note with it: “Maybe the middle could be cabinets, room for the speakers, record player, switches, etc.”

Where the numbers come from

Nobody has put a tape on this wall yet. The sizes are read off the “today” photo, using the guitar: a full-size dreadnought is 41 in from headstock to the bottom of the body, and in the photo it is 273 pixels long, so the wall is 6.7 pixels to the inch. The shelf fronts stand about a foot nearer the camera, so they read about 8% large and are corrected for it.

ThingIn the photoWorks out to
Guitar, headstock to tail273 px41 in (the reference)
Wall, window casing to right-hand corner985 pxabout 148 in
Existing uppers, width740 pxabout 103 in
Existing base, width765 pxabout 106 in
Floor to ceiling at the unit672 pxabout 93–94 in
Existing base cabinet, height215 pxabout 30 in

Call it good to within 5%, which on a twelve-foot wall is several inches. It is enough to quote from and not enough to cut from. The unit fills the wall, so its width is the wall's: drawn at 148 in, built to whatever the tape says. The nook stays 44 in; the three base cabinets share whatever is left, so a different wall changes each of them by a fraction of an inch. The height is taken up by the scribed top rail.

The design, in figures

PartSizeNotes
Whole unit148 w × 94 hWindow casing to corner: left end scribed to the casing, right end to the side wall
Plinth4 h, set back 32×4 ladder levelled first, faced to match
Bench44 w × 15 h × 22 dOn its own plinth; two drawers on full-extension slides, fronts 2113⁄16 × 10¾
Seat44 × 22½ × 1Oak board at 16 in, a 3 in cushion on it: 19 in to sit on. Eased front edge
Nook42½ w × 51½ h × 12 dPapered back; a reading light on it at about 57 in; sides scribed to the casing
Arch42½ w, rising 7¼One board, 9¾ deep, cut to a half-ellipse and set in the face frame over the seat; springs 42 in above the cushion
Shelves over the nook44 w × 25 hTwo columns 20⅞ clear, two rows 11⅜ clear, on the same lines as the rest
Base cabinets (3)3411⁄16 w × 26 h × 18 dFrameless boxes, one adjustable shelf, two full-overlay shaker doors each
Shaker doors (6)17⅛ × 25¾2¼ stiles and rails, flat panel; ⅛ gaps; soft-close cup hinges; brass knobs
Counter104 × 19 × 1Oak. Top at 31 in; 1 in overhang past the doors; eased edge; one piece. Its left end shows above the bench and is finished
Tower3411⁄16 w × 61½ h × 12 dTwo columns 163⁄16 clear, five rows 11⅜ clear
Top row over the TV695⁄16 w × 12⅞ hFour cubbies 16⅜ wide, 11⅜ clear, in line with the top rows either side
TV niche6713⁄16 w × 3511⁄16 hPanel 3½ back from the face; an 8 in chase behind it
TV65 in class, about 57½ × 33Centre of screen 61¾ off the floor and 78¾ from the window casing; 1½ of panel above and below, 5 each side
Media row12⅛ clear16⅜ | 339⁄16 | 16⅜ wide; open to the counter, no bottom board, so the turntable can slide forward
Face frame¾ × 1½ poplarStiles over every upright; 2¼ top rail scribed to the ceiling
Cornice148 × 3½, projecting 2A crown over the top rail, the full width, returned at the window end

All in inches.

How it is built

  • Boxes: ¾ in paint-grade birch or maple plywood, prefinished or primed; ¼ in plywood backs. Shelves fixed in dadoes, or on pins at the carpenter's preference, but held to the grid.
  • Face frame, arch and cornice: poplar, painted. Stiles 1½ in, covering the doubled sides where two boxes meet. Shelf edges get a ¾ in solid nosing or banding. The arch is one board sawn to a template.
  • Counter and seat: solid oak, 1 in, eased front edge, oiled or in a matt hardwax.
  • Doors: six shaker doors, poplar frames with flat panels, made with the rest. The old louvered doors are not reused.
  • Bench: a plywood box strong enough to stand on, its top doubled under the seat board. Drawer boxes on full-extension soft-close slides rated for 100 lb; flat fronts with a brass pull. The cushion is 3 in firm foam in a zipped, washable ticking-stripe cover, made by an upholsterer to the finished opening.
  • TV panel: ¾ in plywood on cleats, with solid blocking behind the mount, a recessed outlet and a low-voltage pass-through behind the screen. An applied moulding around the panel, as in the rendering.
  • Fixing: plinth levelled and screwed down; bases screwed to each other and to the studs; nook, tower and bridge screwed to the studs through a nailer and to the counter. This is a house with small children: every upper is fastened to framing, and nothing relies on its own weight.
  • Finish: a tinted primer, then two coats of a hard cabinet enamel in a deep green, eggshell, sprayed in the shop where possible with the final coat on site. Dark colours show brush marks and filler, so the prep is part of the price. Wallpaper in the nook goes on after the paint.

Cut list

Finished sizes straight from the model, before joinery. Add for dadoes, rabbets and scribes; the carpenter's own shop drawing governs.

No.PartSizeStock

Wires

  • The present unit has an outlet and at least one other wall plate inside it. Whatever is on that wall stays reachable: a box may not be buried behind a cabinet back, so each one is either brought forward to the new surface with a box extender or cut out for.
  • New: a recessed outlet behind the TV, and a duplex in each of the two base cabinets under it, and a box in the nook's back for the reading light, switched at the seat. This is an electrician's hour or two, done after demolition and before the boxes go in.
  • Low voltage: a 2 in conduit or open chase from behind the TV down to the bases under it, a grommet through the counter in each of the three media openings, and a network drop if one is wanted at the switch.
  • The louvers are the ventilation for the amplifier and the switch. Leave the backs of those two bases cut generously for air and cable.

Order of work

StepWhoAbout
1Measure the wall in three places each way, find the studs, the outlets and the ceiling's worst dip; fix the final width and heightCarpenter, with us1 hour
2Settle the open questions below; order the TV, the mount, the wallpaper and the two lightsUs1 week
3Build and prime the boxes, bench, drawers, face frames, counter and panel in the shopCarpenter1–2 weeks
4Empty the shelves; take out the old unit, the rail on the wall and the guitar and its hook; patchCarpenter or us½ day
5Rough in the outlets and the chaseElectrician2–3 hours
6Set the plinths level, the bench and bases, the seat and counter; then nook, tower, media row, bridge and TV panel; face frame; scribeCarpenter2 days
7Fill, caulk, final coat; paper the nook; hang the doors and drawers; template the cushionCarpenter or painter1–2 days
8Hang the TV, set the stereo, load the books; the cushion follows from the upholstererUsAn evening

The room is out of use for about a week, steps 4 to 7.

Rough cost of materials

ItemRough
Plywood: 7 sheets ¾ in, 3 sheets ¼ in$600–800
Poplar for face frames, doors, nosing, the arch and the cornice; framing for the plinths$350–550
Oak for the counter and the seat$250–400
Hinges, drawer slides, brass knobs and pulls, screws, grommets$250–350
Primer, enamel, caulk, filler$200–300
Wallpaper for the nook$100–250
Outlets, boxes, conduit, the reading light and the picture light$250–450
Cushion, made to fit$150–350
Materials, without the TV$2,150–3,450

These are guesses at 2026 lumberyard prices, for sizing the job, and labour is not in them. Labour is the larger part and is the carpenter's to quote. Repainting the room's walls, if the grey goes, is extra.

To settle before anything is cut

  • The tape measure. Wall width from the window casing to the corner, ceiling height at both ends and the middle, and how far out of plumb the right-hand wall is.
  • The TV. The niche is drawn for a 65 in set. A 75 in is taller than the niche and would need the media row or the top row to give up height. Choose the model before the panel is made, and build to its sheet.
  • The colour. Deep green is drawn; the swatches under the model try others. Buy a sample pot and paint a board before the order goes in, and decide whether the grey walls stay or go to a warm stone.
  • The wallpaper for the nook: the leaves in the model stand in for one you choose.
  • The seat. 19 in high and 22 in deep is drawn; sit on a chair of that size before agreeing to it. Choose the cushion fabric with small children in mind.
  • The screen is off centre, about five inches right of the middle of the wall. Stand where the chairs are and check that it sits well.
  • What is on that wall now: which plates are outlets, which are switches, and whether the ceiling register near the right end needs the top rail kept clear of it.
  • The left end. The unit runs right up to the window casing. Check how far the casing and the sill stand off the wall, and that the blind still clears, before deciding whether the end stile butts the casing or laps it.
  • The guitar comes off this wall for good and needs a new one.